+48 795927671

Chemoodporne pokrycie do metalu

GEOFIP-PM4 two-component coating based on mineral geopolymer adhesive is designed for protecting metal substrates from acid corrosion and detrimental impact of salt solutions (up to 7 рН). The coating is resistant to meteorological and biological factors; has no permanent chemical odour; safe alternative to epoxy adhesives.

geofip-pm4

Zamówienie

Opis techniczny
Certyfikat
 Fireproof
 Ultra Durable
 Moistureproof
 Frost-Resistant
 Hypoallergenic
GEOFIP-PM4 COATING TECHNICAL SPECIFICATIONS

Composition

geopolymer adhesive, mineral filling, corrective additives

Solvent

water (not more than 3%)

Package

component А – plastic bag (10 kg);
component В – plastic valve bag (10 kg);
GEOFIP-AM adhesion promoter – plastic valve bag (0.5 kg);
GEOFIP-ZM rust converter – plastic valve bag (0.5 kg);
GEOFIP-GM primer – plastic valve bag (0.5 kg)

Component shelf life

12 months

Exploitation term

10 years

Consistency

pasty homogeneous mixture

Colour

terracotta

Consumption per 1 mm coat *

≈ 2 kg/m2

Thickness of coating

1-5 mm

Open time (handling) *

10 min

Pot life (working time) *

1 hour

Full strength time *

within 28 days

Coating strength

not less than 4 MPa

Adhesion

not less than 1 MPa

* The above values are based on normal climatic conditions (temperature +20 °С, relative air humidity 60%). Other climate conditions can result in the times and values deviation from those indicated in the table.



GEOFIP-PM4 CHARACTERISTICS:

GEOFIP-PM4 two-component coating based on mineral geopolymer adhesive is designed for protecting metal substrates from acid corrosion and detrimental impact of salt solutions (up to 7 рН). The coating is resistant to meteorological and biological factors; has no permanent chemical odour; safe alternative to epoxy adhesives.

SCOPES OF APPLICATIONS

GEOFIP-PM4 coating should be applied to metal and concrete substrates that are operated in aggressive environment or under condition of turbulent flow of liquids in sewage and drainage systems, or in water treatment facilities. The coating protects the substrate against moulds, fungi, various destructive biological processes.

GEOFIP-PM4 protective coating is produced in accordance with TU U 23.6-41182689-001:2017 (Technical Specifications of Ukraine). The coating meets the existing requirements of Ukrainian Sanitary Regulations as evidenced by the sanitary epidemiological examination conclusion; therefore it is permitted for industrial and civil engineering.

PRODUCT MADE FOR PROFESSIONAL USE ONLY!

x
Zamówienie
geofip-pm4

Chemoodporne pokrycie do metalu
Liczba produktów (kg)
Twoje nazwisko
Numer telefonu
Poczta elektroniczna.
Zamówienie